thr3ads.net - samba - [Samba] Problems with Word 200 and Samba 2.2.6 [Nov 2002]

If this information is useful, please help other people find it:
Share via:

Ed Stoner

2002-Nov-19 22:27 UTC

[Samba] Problems with Word 200 and Samba 2.2.6

I'm hoping someone has some insight into a problem I'm currenty having, 
which is:

No one is able to edit (in place) documents with Word 2000 on a samba
(2.2.6) disk share.  A user can open word and save a document to the
share, but when they go to edit the document Word says "Word cannot
complete the save due to a file permission error".  From Microsoft KB
Q211632 it appears that Word 2000 performs the following steps to Save an
Edited File:

1.) Create a temp file (Create ~wrdxxxx.tmp)
2.) Write temp file (Save example data to ~wrdxxxx.tmp)
3.) Delete original file (Delete EXAMPLE.DOC)
4.) Move temp to target name (Move ~wrdxxxx.tmp to EXAMPLE.DOC)

Ed Stoner

2002-Nov-20 17:08 UTC

head link

[Samba] Problems with Word 200 and Samba 2.2.6

Microsoft Word 2000 with Service Pack 2 for Office.
Client OS is Windows 2000 Service Pack 2
I've attached my smb.conf

Actually, the problem was fixed by restarting the samba service.  I feel
stupid that I didn't try it earlier.  I didn't think it would make any
difference (samba is emulating windows behavior a little better than I'd
like :-).  I can see the call to set_nt_acl in the debug logs now has the
correct permissions.  I'm a little confused as to why restarting samba
would have this kind of strange effect.  If you have any ideas on why I'd
love to hear them.

On Wed, 20 Nov 2002, John H Terpstra wrote:
> On Wed, 6 Nov 2002, Ed Stoner wrote:
> 
> > I'm hoping someone has some insight into a problem I'm
currenty having,
> > which is:
> >
> > No one is able to edit (in place) documents with Word 2000 on a samba
> > (2.2.6) disk share.  A user can open word and save a document to the
> > share, but when they go to edit the document Word says "Word
cannot
> > complete the save due to a file permission error".  From
Microsoft KB
> > Q211632 it appears that Word 2000 performs the following steps to Save
an
> > Edited File:
> >
> > 1.) Create a temp file (Create ~wrdxxxx.tmp)
> > 2.) Write temp file (Save example data to ~wrdxxxx.tmp)
> > 3.) Delete original file (Delete EXAMPLE.DOC)
> > 4.) Move temp to target name (Move ~wrdxxxx.tmp to EXAMPLE.DOC)
> >
> > >From examining the samba debug log (attached) it does appear that
this
> > happens.  It also appears that somewhere in steps 1 and 2 above Word
sends
> > a request to turn off the read,write,and execute bits for the owner of
the
> > file.  When you look at this filesystem after the attempted save the
> > original file does indeed have these bits cleared (i.e. the user has
no
> > read,write,or execute permissions on the file), and that I think is
why
> > the error is being generated.
> 
> What update level (service pack) have you installed on your Word 2000
> system? Please tell us what is the exact version information from clicking
> on Help/About in Word.
> 
> Please check that your Word is up to date with all service updates from
> the MS Web site.
> 
> Also, what is the client OS and it's update level?
> 
> Also, please send your smb.conf to jht@samba.org and I'll check it
over.
> 
> - John T.
> 
> > I've tried setting the 'create mask', 'security
mask', 'force create
> > mode', and 'force security mode' parameters to no avail (I
assumed that
> > setting 'force security mode' to 0700 would prevent a file
from getting
> > rwx removed from the owner).  I've also tried turning 'nt acl
support' on
> > and off.  I've attached my config file also.
> >
> > My questions are:
> > 1.) has anyone else seen this error?
> > 2.) if so is there a fix?
> > 3.) why does smbd/posix_acls.c:set_nt_acl allow chmod to 000?
> >
> > P.S.
> > This does not happen with the same client config connecting to either
an
> > NT Share or a 2000 Share, in case anyone is curious (i.e. I don't
think it
> > is a client thing)
> >
> > thanks
> >
> > -----------------
> > Ed Stoner
> > Network Administrator
> > Woodland Hills School District
> > (412) 731-1300 x0109
> >
> 
> -------------- next part --------------
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash) 
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
"testparm"
# to check that you have not made any basic syntactic errors. 
#
#======================= Global Settings
====================================[global]

# workgroup = NT-Domain-Name or Workgroup-Name
   workgroup = WHSD

# server string is the equivalent of the NT Description field
   server string = Zeus Samba Server

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
;   hosts allow = 192.168.1. 192.168.2. 127.

# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
   printcap name = /etc/printcap
;   load printers = yes

# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
;   printing = bsd

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
;  guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m
   log level = 1
# Put a capping on the size of the log files (in Kb).
   max log size = 50

# Security mode. Most people will want user level security. See
# security_level.txt for details.
   security = domain
# Use password server option only with security = server
   password server = NEMESIS

# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
;  password level = 8
;  username level = 8

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
  encrypt passwords = yes
;  smb passwd file = /etc/samba/smbpasswd

# The following are needed to allow password changing from Windows to
# update the Linux sytsem password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file'
above.
# NOTE2: You do NOT need these to allow workstations to change only
#        the encrypted SMB passwords. They allow the Unix password
#        to be kept in sync with the SMB password.
;  unix password sync = Yes
;  passwd program = /usr/bin/passwd %u
;  passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n
*passwd:*all*authentication*tokens*updated*successfully*

# Unix users can map to different SMB User names
;  username map = /etc/samba/smbusers

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /etc/samba/smb.conf.%m

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
   socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
;   interfaces = 192.168.12.2/24 192.168.13.2/24 

# Configure remote browse list synchronisation here
#  request announcement to, or browse list sync from:
#	a specific host or from / to a whole subnet (see below)
;   remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
;   remote announce = 192.168.1.255 192.168.2.44

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
;   local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
;   os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
;   domain master = yes 

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
;   preferred master = yes

# Use only if you have an NT server on your network that has been
# configured at install time to be a primary domain controller.
;   domain controller = <NT-Domain-Controller-SMBName>

# Enable this if you want Samba to be a domain logon server for 
# Windows95 workstations. 
;   domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
#        %L substitutes for this servers netbios name, %U is username
#        You must uncomment the [Profiles] share below
;   logon path = \\%L\Profiles\%U

# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be
specified
# the default order is "host lmhosts wins bcast". "host"
means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system
configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS
Server
;   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
   wins server = 10.1.1.5

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one	WINS Server on the network. The default is NO.
;   wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
   dns proxy = no 

# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
;  preserve case = no
;  short preserve case = no
# Default case is normally upper case for all DOS files
;  default case = lower
# Be very careful with case sensitivity - it can break things!
;  case sensitive = no

winbind separator = +
winbind uid = 1000-10000
winbind gid = 1000-10000
winbind enum users = yes
winbind enum groups = yes
template homedir = /data/home/%U
template shell = /bin/bash
mangling method = hash2
;nt smb support = no

#============================ Share Definitions
=============================[homes]
   comment = Home Directories
   browseable = no
   writeable = yes
#   inherit permissions = yes
#   inherit acls = yes
   create mask = 0700
   force create mode = 0700
   security mask = 0000
   force security mode = 0700
   directory mask = 0700
   force directory mode = 0700
   directory security mask = 0000
   nt acl support = yes
   hide dot files = yes

[data]
   comment = Data on Zeus
   path = /data
   writeable = yes
   valid users = +ntadmin
   admin users = +ntadmin
   browseable = no

[olddata]
   comment = Yesterday's Data
   path = /olddata
   writeable = no
   valid users = +ntadmin
   admin users = +ntadmin
   browseable = no

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
;   comment = Network Logon Service
;   path = /home/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no

# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
;    path = /home/profiles
;    browseable = no
;    guest ok = yes

# NOTE: If you have a BSD-style print system there is no need to 
# specifically define each individual printer
;[printers]
;   comment = All Printers
;   path = /var/spool/samba
;   browseable = no
# Set public = yes to allow user 'guest account' to print
;   guest ok = no
;   writable = no
;   printable = yes

# This one is useful for people to share files
;[tmp]
;   comment = Temporary file space
;   path = /tmp
;   read only = no
;   public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
;   comment = Public Stuff
;   path = /home/samba
;   public = yes
;   read only = yes
;   write list = @staff

# Other examples. 
#
# A private printer, usable only by fred. Spool data will be placed in
fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
;   comment = Fred's Printer
;   valid users = fred
;   path = /homes/fred
;   printer = freds_printer
;   public = no
;   writable = no
;   printable = yes

# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
;   comment = Fred's Service
;   path = /usr/somewhere/private
;   valid users = fred
;   public = no
;   writable = yes
;   printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %u option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
;  comment = PC Directories
;  path = /usr/pc/%m
;  public = no
;  writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
;   path = /usr/somewhere/else/public
;   public = yes
;   only guest = yes
;   writable = yes
;   printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
;   comment = Mary's and Fred's stuff
;   path = /usr/somewhere/shared
;   valid users = mary fred
;   public = no
;   writable = yes
;   printable = no
;   create mask = 0765

John H Terpstra

2002-Nov-20 22:18 UTC

head link

[Samba] Problems with Word 200 and Samba 2.2.6

On Wed, 6 Nov 2002, Ed Stoner wrote:
> I'm hoping someone has some insight into a problem I'm currenty
having,
> which is:
>
> No one is able to edit (in place) documents with Word 2000 on a samba
> (2.2.6) disk share.  A user can open word and save a document to the
> share, but when they go to edit the document Word says "Word cannot
> complete the save due to a file permission error".  From Microsoft KB
> Q211632 it appears that Word 2000 performs the following steps to Save an
> Edited File:
>
> 1.) Create a temp file (Create ~wrdxxxx.tmp)
> 2.) Write temp file (Save example data to ~wrdxxxx.tmp)
> 3.) Delete original file (Delete EXAMPLE.DOC)
> 4.) Move temp to target name (Move ~wrdxxxx.tmp to EXAMPLE.DOC)
>
> >From examining the samba debug log (attached) it does appear that this
> happens.  It also appears that somewhere in steps 1 and 2 above Word sends
> a request to turn off the read,write,and execute bits for the owner of the
> file.  When you look at this filesystem after the attempted save the
> original file does indeed have these bits cleared (i.e. the user has no
> read,write,or execute permissions on the file), and that I think is why
> the error is being generated.
What update level (service pack) have you installed on your Word 2000
system? Please tell us what is the exact version information from clicking
on Help/About in Word.

Please check that your Word is up to date with all service updates from
the MS Web site.

Also, what is the client OS and it's update level?

Also, please send your smb.conf to jht@samba.org and I'll check it over.

- John T.
> I've tried setting the 'create mask', 'security mask',
'force create
> mode', and 'force security mode' parameters to no avail (I
assumed that
> setting 'force security mode' to 0700 would prevent a file from
getting
> rwx removed from the owner).  I've also tried turning 'nt acl
support' on
> and off.  I've attached my config file also.
>
> My questions are:
> 1.) has anyone else seen this error?
> 2.) if so is there a fix?
> 3.) why does smbd/posix_acls.c:set_nt_acl allow chmod to 000?
>
> P.S.
> This does not happen with the same client config connecting to either an
> NT Share or a 2000 Share, in case anyone is curious (i.e. I don't think
it
> is a client thing)
>
> thanks
>
> -----------------
> Ed Stoner
> Network Administrator
> Woodland Hills School District
> (412) 731-1300 x0109
>
-- 
John H Terpstra
Email: jht@samba.org
-------------- next part --------------
[2002/11/06 12:17:14, 3] smbd/sec_ctx.c:set_sec_ctx(328)
  setting sec ctx (500, 500) - sec_ctx_stack_ndx = 0
[2002/11/06 12:17:14, 3] smbd/sec_ctx.c:set_sec_ctx(334)
  2 user groups: 
  500 300 
[2002/11/06 12:17:14, 3] smbd/oplock.c:initial_break_processing(526)
  initial_break_processing: called for dev = 3a00, inode = 69795960 file_id =
1557
  Current oplocks_open (exclusive = 1, levelII = 0)
[2002/11/06 12:17:14, 3] smbd/oplock.c:initial_break_processing(563)
  initial_break_processing: file blah/test.doc (dev = 3a00, inode = 69795960,
file_id = 1557) has no oplock.
  Allowing break to succeed regardless.
[2002/11/06 12:17:14, 3] smbd/oplock.c:oplock_break(890)
  oplock_break: returning success for dev = 3a00, inode = 69795960, file_id =
1557
  Current exclusive_oplocks_open = 1
[2002/11/06 12:17:14, 2] smbd/open.c:open_file(242)
  Ed opened file blah/test.doc read=Yes write=No (numopen=4)
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14678 of length 88
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBnttrans (pid 29782)
[2002/11/06 12:17:14, 3]
smbd/nttrans.c:call_nt_transact_query_security_desc(1660)
  call_nt_transact_query_security_desc: file = blah/test.doc
[2002/11/06 12:17:14, 3]
smbd/nttrans.c:call_nt_transact_query_security_desc(1687)
  call_nt_transact_query_security_desc: sd_size = 176.
[2002/11/06 12:17:14, 3] smbd/error.c:error_packet(91)
  error string = Function not implemented
[2002/11/06 12:17:14, 3] smbd/error.c:error_packet(106)
  error packet at smbd/nttrans.c(86) cmd=160 (SMBnttrans)
NT_STATUS_BUFFER_TOO_SMALL
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14679 of length 88
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBnttrans (pid 29782)
[2002/11/06 12:17:14, 3]
smbd/nttrans.c:call_nt_transact_query_security_desc(1660)
  call_nt_transact_query_security_desc: file = blah/test.doc
[2002/11/06 12:17:14, 3]
smbd/nttrans.c:call_nt_transact_query_security_desc(1687)
  call_nt_transact_query_security_desc: sd_size = 176.
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14680 of length 93
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBntcreateX (pid 29782)
[2002/11/06 12:17:14, 3] smbd/sec_ctx.c:set_sec_ctx(328)
  setting sec ctx (500, 500) - sec_ctx_stack_ndx = 0
[2002/11/06 12:17:14, 3] smbd/sec_ctx.c:set_sec_ctx(334)
  2 user groups: 
  500 300 
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah]
[2002/11/06 12:17:14, 3] smbd/dosmode.c:unix_mode(111)
  unix_mode(blah) returning 0700
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah]
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14681 of length 88
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBnttrans (pid 29782)
[2002/11/06 12:17:14, 3]
smbd/nttrans.c:call_nt_transact_query_security_desc(1660)
  call_nt_transact_query_security_desc: file = blah
[2002/11/06 12:17:14, 3] smbd/dosmode.c:unix_mode(111)
  unix_mode(blah) returning 0700
[2002/11/06 12:17:14, 3]
smbd/nttrans.c:call_nt_transact_query_security_desc(1687)
  call_nt_transact_query_security_desc: sd_size = 212.
[2002/11/06 12:17:14, 3] smbd/error.c:error_packet(91)
  error string = Function not implemented
[2002/11/06 12:17:14, 3] smbd/error.c:error_packet(106)
  error packet at smbd/nttrans.c(86) cmd=160 (SMBnttrans)
NT_STATUS_BUFFER_TOO_SMALL
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14682 of length 88
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBnttrans (pid 29782)
[2002/11/06 12:17:14, 3]
smbd/nttrans.c:call_nt_transact_query_security_desc(1660)
  call_nt_transact_query_security_desc: file = blah
[2002/11/06 12:17:14, 3] smbd/dosmode.c:unix_mode(111)
  unix_mode(blah) returning 0700
[2002/11/06 12:17:14, 3]
smbd/nttrans.c:call_nt_transact_query_security_desc(1687)
  call_nt_transact_query_security_desc: sd_size = 212.
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14683 of length 45
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBclose (pid 29782)
[2002/11/06 12:17:14, 3] smbd/reply.c:reply_close(3142)
  close directory fnum=12625
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14684 of length 88
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBnttrans (pid 29782)
[2002/11/06 12:17:14, 3] smbd/sec_ctx.c:set_sec_ctx(328)
  setting sec ctx (500, 500) - sec_ctx_stack_ndx = 0
[2002/11/06 12:17:14, 3] smbd/sec_ctx.c:set_sec_ctx(334)
  2 user groups: 
  500 300 
[2002/11/06 12:17:14, 3]
smbd/nttrans.c:call_nt_transact_query_security_desc(1660)
  call_nt_transact_query_security_desc: file = blah/test.doc
[2002/11/06 12:17:14, 3]
smbd/nttrans.c:call_nt_transact_query_security_desc(1687)
  call_nt_transact_query_security_desc: sd_size = 176.
[2002/11/06 12:17:14, 3] smbd/error.c:error_packet(91)
  error string = Function not implemented
[2002/11/06 12:17:14, 3] smbd/error.c:error_packet(106)
  error packet at smbd/nttrans.c(86) cmd=160 (SMBnttrans)
NT_STATUS_BUFFER_TOO_SMALL
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14685 of length 88
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBnttrans (pid 29782)
[2002/11/06 12:17:14, 3]
smbd/nttrans.c:call_nt_transact_query_security_desc(1660)
  call_nt_transact_query_security_desc: file = blah/test.doc
[2002/11/06 12:17:14, 3]
smbd/nttrans.c:call_nt_transact_query_security_desc(1687)
  call_nt_transact_query_security_desc: sd_size = 176.
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14686 of length 76
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBtrans2 (pid 29782)
[2002/11/06 12:17:14, 3] smbd/trans2.c:call_trans2qfilepathinfo(1647)
  call_trans2qfilepathinfo: TRANSACT2_QFILEINFO: level = 1004
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah/test.doc]
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah/test.doc]
[2002/11/06 12:17:14, 3] smbd/trans2.c:call_trans2qfilepathinfo(1733)
  call_trans2qfilepathinfo blah/test.doc level=1004 call=7 total_data=0
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14687 of length 45
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBclose (pid 29782)
[2002/11/06 12:17:14, 3] smbd/reply.c:reply_close(3154)
  close fd=-1 fnum=12623 (numopen=4)
[2002/11/06 12:17:14, 2] smbd/close.c:close_normal_file(211)
  ed closed file blah/test.doc (numopen=3) 
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14688 of length 106
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBntcreateX (pid 29782)
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/~WRD0000.tmp]
[2002/11/06 12:17:14, 3] smbd/dosmode.c:unix_mode(111)
  unix_mode(blah/~WRD0000.tmp) returning 0700
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah/~WRD0000.tmp]
[2002/11/06 12:17:14, 3] smbd/oplock.c:initial_break_processing(526)
  initial_break_processing: called for dev = 3a00, inode = 69796001 file_id =
1558
  Current oplocks_open (exclusive = 1, levelII = 0)
[2002/11/06 12:17:14, 3] smbd/sec_ctx.c:set_sec_ctx(328)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2002/11/06 12:17:14, 3] smbd/oplock.c:initial_break_processing(526)
  initial_break_processing: called for dev = 3a00, inode = 69796001 file_id =
1558
  Current oplocks_open (exclusive = 1, levelII = 0)
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14688 of length 55
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBlockingX (pid 29782)
[2002/11/06 12:17:14, 3] smbd/sec_ctx.c:set_sec_ctx(328)
  setting sec ctx (500, 500) - sec_ctx_stack_ndx = 0
[2002/11/06 12:17:14, 3] smbd/sec_ctx.c:set_sec_ctx(334)
  2 user groups: 
  500 300 
[2002/11/06 12:17:14, 3] smbd/oplock.c:initial_break_processing(526)
  initial_break_processing: called for dev = 3a00, inode = 69796001 file_id =
1558
  Current oplocks_open (exclusive = 0, levelII = 0)
[2002/11/06 12:17:14, 3] smbd/oplock.c:initial_break_processing(563)
  initial_break_processing: file blah/~WRD0000.tmp (dev = 3a00, inode =
69796001, file_id = 1558) has no oplock.
  Allowing break to succeed regardless.
[2002/11/06 12:17:14, 3] smbd/oplock.c:oplock_break(890)
  oplock_break: returning success for dev = 3a00, inode = 69796001, file_id =
1558
  Current exclusive_oplocks_open = 0
[2002/11/06 12:17:14, 2] smbd/open.c:open_file(242)
  Ed opened file blah/~WRD0000.tmp read=Yes write=No (numopen=4)
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14690 of length 93
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBntcreateX (pid 29782)
[2002/11/06 12:17:14, 3] smbd/sec_ctx.c:set_sec_ctx(328)
  setting sec ctx (500, 500) - sec_ctx_stack_ndx = 0
[2002/11/06 12:17:14, 3] smbd/sec_ctx.c:set_sec_ctx(334)
  2 user groups: 
  500 300 
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah]
[2002/11/06 12:17:14, 3] smbd/dosmode.c:unix_mode(111)
  unix_mode(blah) returning 0700
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah]
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14691 of length 88
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBnttrans (pid 29782)
[2002/11/06 12:17:14, 3]
smbd/nttrans.c:call_nt_transact_query_security_desc(1660)
  call_nt_transact_query_security_desc: file = blah
[2002/11/06 12:17:14, 3] smbd/dosmode.c:unix_mode(111)
  unix_mode(blah) returning 0700
[2002/11/06 12:17:14, 3]
smbd/nttrans.c:call_nt_transact_query_security_desc(1687)
  call_nt_transact_query_security_desc: sd_size = 212.
[2002/11/06 12:17:14, 3] smbd/error.c:error_packet(91)
  error string = Function not implemented
[2002/11/06 12:17:14, 3] smbd/error.c:error_packet(106)
  error packet at smbd/nttrans.c(86) cmd=160 (SMBnttrans)
NT_STATUS_BUFFER_TOO_SMALL
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14692 of length 88
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBnttrans (pid 29782)
[2002/11/06 12:17:14, 3]
smbd/nttrans.c:call_nt_transact_query_security_desc(1660)
  call_nt_transact_query_security_desc: file = blah
[2002/11/06 12:17:14, 3] smbd/dosmode.c:unix_mode(111)
  unix_mode(blah) returning 0700
[2002/11/06 12:17:14, 3]
smbd/nttrans.c:call_nt_transact_query_security_desc(1687)
  call_nt_transact_query_security_desc: sd_size = 212.
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14693 of length 45
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBclose (pid 29782)
[2002/11/06 12:17:14, 3] smbd/reply.c:reply_close(3142)
  close directory fnum=12628
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14694 of length 88
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBnttrans (pid 29782)
[2002/11/06 12:17:14, 3] smbd/sec_ctx.c:set_sec_ctx(328)
  setting sec ctx (500, 500) - sec_ctx_stack_ndx = 0
[2002/11/06 12:17:14, 3] smbd/sec_ctx.c:set_sec_ctx(334)
  2 user groups: 
  500 300 
[2002/11/06 12:17:14, 3]
smbd/nttrans.c:call_nt_transact_query_security_desc(1660)
  call_nt_transact_query_security_desc: file = blah/~WRD0000.tmp
[2002/11/06 12:17:14, 3]
smbd/nttrans.c:call_nt_transact_query_security_desc(1687)
  call_nt_transact_query_security_desc: sd_size = 176.
[2002/11/06 12:17:14, 3] smbd/error.c:error_packet(91)
  error string = Function not implemented
[2002/11/06 12:17:14, 3] smbd/error.c:error_packet(106)
  error packet at smbd/nttrans.c(86) cmd=160 (SMBnttrans)
NT_STATUS_BUFFER_TOO_SMALL
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14695 of length 88
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBnttrans (pid 29782)
[2002/11/06 12:17:14, 3]
smbd/nttrans.c:call_nt_transact_query_security_desc(1660)
  call_nt_transact_query_security_desc: file = blah/~WRD0000.tmp
[2002/11/06 12:17:14, 3]
smbd/nttrans.c:call_nt_transact_query_security_desc(1687)
  call_nt_transact_query_security_desc: sd_size = 176.
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14696 of length 264
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBnttrans (pid 29782)
[2002/11/06 12:17:14, 3] smbd/nttrans.c:call_nt_transact_set_security_desc(1779)
  call_nt_transact_set_security_desc: file = blah/~WRD0000.tmp, sent 0x20000004
[2002/11/06 12:17:14, 3] smbd/dosmode.c:unix_mode(111)
  unix_mode(blah/~WRD0000.tmp) returning 0700
[2002/11/06 12:17:14, 3] smbd/posix_acls.c:set_nt_acl(2331)
  set_nt_acl: chmod blah/~WRD0000.tmp. perms = 00.
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14697 of length 45
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBclose (pid 29782)
[2002/11/06 12:17:14, 3] smbd/reply.c:reply_close(3154)
  close fd=-1 fnum=12626 (numopen=4)
[2002/11/06 12:17:14, 2] smbd/close.c:close_normal_file(211)
  ed closed file blah/~WRD0000.tmp (numopen=3) 
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14698 of length 76
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBtrans2 (pid 29782)
[2002/11/06 12:17:14, 3] smbd/trans2.c:call_trans2qfilepathinfo(1647)
  call_trans2qfilepathinfo: TRANSACT2_QFILEINFO: level = 1022
[2002/11/06 12:17:14, 3] smbd/trans2.c:call_trans2qfilepathinfo(1733)
  call_trans2qfilepathinfo blah/test.doc level=1022 call=7 total_data=0
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14699 of length 45
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBclose (pid 29782)
[2002/11/06 12:17:14, 3] smbd/reply.c:reply_close(3154)
  close fd=120 fnum=12621 (numopen=3)
[2002/11/06 12:17:14, 2] smbd/close.c:close_normal_file(211)
  ed closed file blah/test.doc (numopen=2) 
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14700 of length 61
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBunlink (pid 29782)
[2002/11/06 12:17:14, 3] smbd/reply.c:reply_unlink(2141)
  reply_unlink : \blah\~WRL0001.tmp
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/~WRL0001.tmp]
[2002/11/06 12:17:14, 3] smbd/error.c:error_packet(91)
  error string = No such file or directory
[2002/11/06 12:17:14, 3] smbd/error.c:error_packet(106)
  error packet at smbd/reply.c(2145) cmd=6 (SMBunlink)
NT_STATUS_OBJECT_NAME_NOT_FOUND
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14701 of length 77
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBmv (pid 29782)
[2002/11/06 12:17:14, 3] smbd/reply.c:reply_mv(4129)
  reply_mv : \blah\test.doc -> \blah\~WRL0001.tmp
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/test.doc]
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/~WRL0001.tmp]
[2002/11/06 12:17:14, 3] smbd/reply.c:rename_internals(3929)
  rename_internals: case_sensitive = 0, case_preserve = 1, short case preserve =
1, directory = blah/test.doc, newname = blah/~WRL0001.tmp,
newname_last_component = ~WRL0001.tmp, mangle_is_8_3 = 1
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah/test.doc]
[2002/11/06 12:17:14, 2] smbd/open.c:open_file(242)
  Ed opened file blah/test.doc read=Yes write=No (numopen=3)
[2002/11/06 12:17:14, 2] smbd/close.c:close_normal_file(211)
  ed closed file blah/test.doc (numopen=2) 
[2002/11/06 12:17:14, 3] smbd/reply.c:rename_internals(4028)
  rename_internals: succeeded doing rename on blah/test.doc ->
blah/~WRL0001.tmp
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14702 of length 45
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBclose (pid 29782)
[2002/11/06 12:17:14, 3] smbd/reply.c:reply_close(3154)
  close fd=121 fnum=12622 (numopen=2)
[2002/11/06 12:17:14, 2] smbd/close.c:close_normal_file(211)
  ed closed file blah/~WRD0000.tmp (numopen=1) 
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14703 of length 57
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBunlink (pid 29782)
[2002/11/06 12:17:14, 3] smbd/reply.c:reply_unlink(2141)
  reply_unlink : \blah\test.doc
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/test.doc]
[2002/11/06 12:17:14, 3] smbd/error.c:error_packet(91)
  error string = No such file or directory
[2002/11/06 12:17:14, 3] smbd/error.c:error_packet(106)
  error packet at smbd/reply.c(2145) cmd=6 (SMBunlink)
NT_STATUS_OBJECT_NAME_NOT_FOUND
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14704 of length 77
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBmv (pid 29782)
[2002/11/06 12:17:14, 3] smbd/reply.c:reply_mv(4129)
  reply_mv : \blah\~WRD0000.tmp -> \blah\test.doc
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/~WRD0000.tmp]
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/test.doc]
[2002/11/06 12:17:14, 3] smbd/reply.c:rename_internals(3929)
  rename_internals: case_sensitive = 0, case_preserve = 1, short case preserve =
1, directory = blah/~WRD0000.tmp, newname = blah/test.doc,
newname_last_component = test.doc, mangle_is_8_3 = 1
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah/~WRD0000.tmp]
[2002/11/06 12:17:14, 2] smbd/open.c:open_file(242)
  Ed opened file blah/~WRD0000.tmp read=Yes write=No (numopen=2)
[2002/11/06 12:17:14, 2] smbd/close.c:close_normal_file(211)
  ed closed file blah/~WRD0000.tmp (numopen=1) 
[2002/11/06 12:17:14, 3] smbd/reply.c:rename_internals(4028)
  rename_internals: succeeded doing rename on blah/~WRD0000.tmp ->
blah/test.doc
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14705 of length 97
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBtrans2 (pid 29782)
[2002/11/06 12:17:14, 3] smbd/trans2.c:call_trans2qfilepathinfo(1702)
  call_trans2qfilepathinfo: TRANSACT2_QPATHINFO: level = 1004
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/~WRL0001.tmp]
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah/~WRL0001.tmp]
[2002/11/06 12:17:14, 3] smbd/trans2.c:call_trans2qfilepathinfo(1733)
  call_trans2qfilepathinfo blah/~WRL0001.tmp level=1004 call=5 total_data=0
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14706 of length 106
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBntcreateX (pid 29782)
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/~WRL0001.tmp]
[2002/11/06 12:17:14, 3] smbd/dosmode.c:unix_mode(111)
  unix_mode(blah/~WRL0001.tmp) returning 0700
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah/~WRL0001.tmp]
[2002/11/06 12:17:14, 2] smbd/open.c:open_file(242)
  Ed opened file blah/~WRL0001.tmp read=Yes write=Yes (numopen=2)
[2002/11/06 12:17:14, 3] smbd/oplock_linux.c:linux_set_kernel_oplock(185)
  linux_set_kernel_oplock: got kernel oplock on file blah/~WRL0001.tmp, dev =
3a00, inode = 69795960, file_id = 1567
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14707 of length 63
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBreadX (pid 29782)
[2002/11/06 12:17:14, 3] smbd/reply.c:send_file_readX(2546)
  send_file_readX fnum=12631 max=4096 nread=4096
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14708 of length 63
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBreadX (pid 29782)
[2002/11/06 12:17:14, 3] smbd/reply.c:send_file_readX(2546)
  send_file_readX fnum=12631 max=3072 nread=3072
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14709 of length 93
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBtrans2 (pid 29782)
[2002/11/06 12:17:14, 3] smbd/trans2.c:call_trans2qfilepathinfo(1702)
  call_trans2qfilepathinfo: TRANSACT2_QPATHINFO: level = 1004
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/test.doc]
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah/test.doc]
[2002/11/06 12:17:14, 3] smbd/trans2.c:call_trans2qfilepathinfo(1733)
  call_trans2qfilepathinfo blah/test.doc level=1004 call=5 total_data=0
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14710 of length 102
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBntcreateX (pid 29782)
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/test.doc]
[2002/11/06 12:17:14, 3] smbd/dosmode.c:unix_mode(111)
  unix_mode(blah/test.doc) returning 0700
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah/test.doc]
[2002/11/06 12:17:14, 3] smbd/error.c:error_packet(91)
  error string = Permission denied
[2002/11/06 12:17:14, 3] smbd/error.c:error_packet(106)
  error packet at smbd/nttrans.c(889) cmd=162 (SMBntcreateX)
NT_STATUS_ACCESS_DENIED
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14711 of length 93
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBtrans2 (pid 29782)
[2002/11/06 12:17:14, 3] smbd/trans2.c:call_trans2qfilepathinfo(1702)
  call_trans2qfilepathinfo: TRANSACT2_QPATHINFO: level = 1004
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/test.doc]
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah/test.doc]
[2002/11/06 12:17:14, 3] smbd/trans2.c:call_trans2qfilepathinfo(1733)
  call_trans2qfilepathinfo blah/test.doc level=1004 call=5 total_data=0
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14712 of length 102
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBntcreateX (pid 29782)
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/test.doc]
[2002/11/06 12:17:14, 3] smbd/dosmode.c:unix_mode(111)
  unix_mode(blah/test.doc) returning 0700
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah/test.doc]
[2002/11/06 12:17:14, 3] smbd/open.c:open_file(174)
  Error opening file blah/test.doc (Permission denied) (local_flags=0) (flags=0)
[2002/11/06 12:17:14, 3] smbd/error.c:error_packet(91)
  error string = Permission denied
[2002/11/06 12:17:14, 3] smbd/error.c:error_packet(106)
  error packet at smbd/nttrans.c(889) cmd=162 (SMBntcreateX)
NT_STATUS_ACCESS_DENIED
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14713 of length 106
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBntcreateX (pid 29782)
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/~WRL0001.tmp]
[2002/11/06 12:17:14, 3] smbd/dosmode.c:unix_mode(111)
  unix_mode(blah/~WRL0001.tmp) returning 0700
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah/~WRL0001.tmp]
[2002/11/06 12:17:14, 3] smbd/oplock.c:initial_break_processing(526)
  initial_break_processing: called for dev = 3a00, inode = 69795960 file_id =
1567
  Current oplocks_open (exclusive = 1, levelII = 0)
[2002/11/06 12:17:14, 3] smbd/sec_ctx.c:set_sec_ctx(328)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2002/11/06 12:17:14, 3] smbd/oplock.c:initial_break_processing(526)
  initial_break_processing: called for dev = 3a00, inode = 69795960 file_id =
1567
  Current oplocks_open (exclusive = 1, levelII = 0)
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14713 of length 115
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBlockingX (pid 29782)
[2002/11/06 12:17:14, 3] smbd/sec_ctx.c:set_sec_ctx(328)
  setting sec ctx (500, 500) - sec_ctx_stack_ndx = 0
[2002/11/06 12:17:14, 3] smbd/sec_ctx.c:set_sec_ctx(334)
  2 user groups: 
  500 300 
[2002/11/06 12:17:14, 3] smbd/reply.c:reply_lockingX(4752)
  lockingX fnum=12631 type=16 num_locks=3 num_ulocks=0
[2002/11/06 12:17:14, 3] smbd/oplock.c:initial_break_processing(526)
  initial_break_processing: called for dev = 3a00, inode = 69795960 file_id =
1567
  Current oplocks_open (exclusive = 1, levelII = 0)
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14714 of length 55
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBlockingX (pid 29782)
[2002/11/06 12:17:14, 3] smbd/oplock.c:initial_break_processing(526)
  initial_break_processing: called for dev = 3a00, inode = 69795960 file_id =
1567
  Current oplocks_open (exclusive = 0, levelII = 0)
[2002/11/06 12:17:14, 3] smbd/oplock.c:initial_break_processing(563)
  initial_break_processing: file blah/~WRL0001.tmp (dev = 3a00, inode =
69795960, file_id = 1567) has no oplock.
  Allowing break to succeed regardless.
[2002/11/06 12:17:14, 3] smbd/oplock.c:oplock_break(890)
  oplock_break: returning success for dev = 3a00, inode = 69795960, file_id =
1567
  Current exclusive_oplocks_open = 0
[2002/11/06 12:17:14, 2] smbd/open.c:open_file(242)
  Ed opened file blah/~WRL0001.tmp read=Yes write=No (numopen=3)
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14716 of length 120
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBtrans2 (pid 29782)
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah/~WRL0001.tmp]
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah/~WRL0001.tmp]
[2002/11/06 12:17:14, 3] smbd/trans2.c:call_trans2setfilepathinfo(2417)
  call_trans2setfilepathinfo(8) blah/~WRL0001.tmp info_level=1004 totdata=40
[2002/11/06 12:17:14, 3] smbd/dosmode.c:unix_mode(111)
  unix_mode(blah/~WRL0001.tmp) returning 0600
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14717 of length 45
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBclose (pid 29782)
[2002/11/06 12:17:14, 3] smbd/reply.c:reply_close(3154)
  close fd=-1 fnum=12634 (numopen=3)
[2002/11/06 12:17:14, 2] smbd/close.c:close_normal_file(211)
  ed closed file blah/~WRL0001.tmp (numopen=2) 
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14718 of length 93
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBtrans2 (pid 29782)
[2002/11/06 12:17:14, 3] smbd/trans2.c:call_trans2qfilepathinfo(1702)
  call_trans2qfilepathinfo: TRANSACT2_QPATHINFO: level = 1004
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/test.doc]
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah/test.doc]
[2002/11/06 12:17:14, 3] smbd/trans2.c:call_trans2qfilepathinfo(1733)
  call_trans2qfilepathinfo blah/test.doc level=1004 call=5 total_data=0
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14719 of length 102
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBntcreateX (pid 29782)
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/test.doc]
[2002/11/06 12:17:14, 3] smbd/dosmode.c:unix_mode(111)
  unix_mode(blah/test.doc) returning 0700
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah/test.doc]
[2002/11/06 12:17:14, 3] smbd/error.c:error_packet(91)
  error string = Permission denied
[2002/11/06 12:17:14, 3] smbd/error.c:error_packet(106)
  error packet at smbd/nttrans.c(889) cmd=162 (SMBntcreateX)
NT_STATUS_ACCESS_DENIED
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14720 of length 93
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBtrans2 (pid 29782)
[2002/11/06 12:17:14, 3] smbd/trans2.c:call_trans2qfilepathinfo(1702)
  call_trans2qfilepathinfo: TRANSACT2_QPATHINFO: level = 1004
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/test.doc]
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah/test.doc]
[2002/11/06 12:17:14, 3] smbd/trans2.c:call_trans2qfilepathinfo(1733)
  call_trans2qfilepathinfo blah/test.doc level=1004 call=5 total_data=0
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14721 of length 93
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBtrans2 (pid 29782)
[2002/11/06 12:17:14, 3] smbd/trans2.c:call_trans2qfilepathinfo(1702)
  call_trans2qfilepathinfo: TRANSACT2_QPATHINFO: level = 1035
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/test.doc]
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah/test.doc]
[2002/11/06 12:17:14, 3] smbd/trans2.c:call_trans2qfilepathinfo(1733)
  call_trans2qfilepathinfo blah/test.doc level=1035 call=5 total_data=0
[2002/11/06 12:17:14, 3] smbd/process.c:process_smb(878)
  Transaction 14722 of length 57
[2002/11/06 12:17:14, 3] smbd/process.c:switch_message(685)
  switch message SMBunlink (pid 29782)
[2002/11/06 12:17:14, 3] smbd/reply.c:reply_unlink(2141)
  reply_unlink : \blah\test.doc
[2002/11/06 12:17:14, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/test.doc]
[2002/11/06 12:17:14, 3] smbd/error.c:error_packet(106)
  error packet at smbd/reply.c(2145) cmd=6 (SMBunlink) NT_STATUS_CANNOT_DELETE
[2002/11/06 12:17:47, 3] smbd/process.c:process_smb(878)
  Transaction 14723 of length 97
[2002/11/06 12:17:47, 3] smbd/process.c:switch_message(685)
  switch message SMBtrans2 (pid 29782)
[2002/11/06 12:17:47, 3] smbd/trans2.c:call_trans2qfilepathinfo(1702)
  call_trans2qfilepathinfo: TRANSACT2_QPATHINFO: level = 1004
[2002/11/06 12:17:47, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/~$RL0001.tmp]
[2002/11/06 12:17:47, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah/~$RL0001.tmp]
[2002/11/06 12:17:47, 3] smbd/trans2.c:call_trans2qfilepathinfo(1723)
  call_trans2qfilepathinfo: vfs_stat of blah/~$RL0001.tmp failed (No such file
or directory)
[2002/11/06 12:17:47, 3] smbd/error.c:error_packet(91)
  error string = No such file or directory
[2002/11/06 12:17:47, 3] smbd/error.c:error_packet(106)
  error packet at smbd/trans2.c(1725) cmd=50 (SMBtrans2)
NT_STATUS_OBJECT_NAME_NOT_FOUND
[2002/11/06 12:17:47, 3] smbd/process.c:process_smb(878)
  Transaction 14724 of length 120
[2002/11/06 12:17:47, 3] smbd/process.c:switch_message(685)
  switch message SMBtrans2 (pid 29782)
[2002/11/06 12:17:47, 3] smbd/trans2.c:call_trans2setfilepathinfo(2417)
  call_trans2setfilepathinfo(8) blah/~WRL0001.tmp info_level=1004 totdata=40
[2002/11/06 12:17:47, 3] smbd/process.c:process_smb(878)
  Transaction 14725 of length 75
[2002/11/06 12:17:47, 3] smbd/process.c:switch_message(685)
  switch message SMBlockingX (pid 29782)
[2002/11/06 12:17:47, 3] smbd/reply.c:reply_lockingX(4752)
  lockingX fnum=12631 type=16 num_locks=0 num_ulocks=1
[2002/11/06 12:17:47, 3] smbd/process.c:process_smb(878)
  Transaction 14726 of length 75
[2002/11/06 12:17:47, 3] smbd/process.c:switch_message(685)
  switch message SMBlockingX (pid 29782)
[2002/11/06 12:17:47, 3] smbd/reply.c:reply_lockingX(4752)
  lockingX fnum=12631 type=16 num_locks=0 num_ulocks=1
[2002/11/06 12:17:47, 3] smbd/process.c:process_smb(878)
  Transaction 14727 of length 75
[2002/11/06 12:17:47, 3] smbd/process.c:switch_message(685)
  switch message SMBlockingX (pid 29782)
[2002/11/06 12:17:47, 3] smbd/reply.c:reply_lockingX(4752)
  lockingX fnum=12631 type=16 num_locks=0 num_ulocks=1
[2002/11/06 12:17:47, 3] smbd/process.c:process_smb(878)
  Transaction 14728 of length 45
[2002/11/06 12:17:47, 3] smbd/process.c:switch_message(685)
  switch message SMBclose (pid 29782)
[2002/11/06 12:17:47, 3] smbd/reply.c:reply_close(3154)
  close fd=116 fnum=12631 (numopen=2)
[2002/11/06 12:17:47, 2] smbd/close.c:close_normal_file(211)
  ed closed file blah/~WRL0001.tmp (numopen=1) 
[2002/11/06 12:17:47, 3] smbd/process.c:process_smb(878)
  Transaction 14729 of length 97
[2002/11/06 12:17:47, 3] smbd/process.c:switch_message(685)
  switch message SMBtrans2 (pid 29782)
[2002/11/06 12:17:47, 3] smbd/trans2.c:call_trans2qfilepathinfo(1702)
  call_trans2qfilepathinfo: TRANSACT2_QPATHINFO: level = 1004
[2002/11/06 12:17:47, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/~WRL0001.tmp]
[2002/11/06 12:17:47, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah/~WRL0001.tmp]
[2002/11/06 12:17:47, 3] smbd/trans2.c:call_trans2qfilepathinfo(1733)
  call_trans2qfilepathinfo blah/~WRL0001.tmp level=1004 call=5 total_data=0
[2002/11/06 12:17:47, 3] smbd/process.c:process_smb(878)
  Transaction 14730 of length 106
[2002/11/06 12:17:47, 3] smbd/process.c:switch_message(685)
  switch message SMBntcreateX (pid 29782)
[2002/11/06 12:17:47, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/~WRL0001.tmp]
[2002/11/06 12:17:47, 3] smbd/dosmode.c:unix_mode(111)
  unix_mode(blah/~WRL0001.tmp) returning 0700
[2002/11/06 12:17:47, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah/~WRL0001.tmp]
[2002/11/06 12:17:47, 2] smbd/open.c:open_file(242)
  Ed opened file blah/~WRL0001.tmp read=Yes write=Yes (numopen=2)
[2002/11/06 12:17:47, 3] smbd/oplock_linux.c:linux_set_kernel_oplock(185)
  linux_set_kernel_oplock: got kernel oplock on file blah/~WRL0001.tmp, dev =
3a00, inode = 69795960, file_id = 1572
[2002/11/06 12:17:47, 3] smbd/process.c:process_smb(878)
  Transaction 14731 of length 45
[2002/11/06 12:17:47, 3] smbd/process.c:switch_message(685)
  switch message SMBclose (pid 29782)
[2002/11/06 12:17:47, 3] smbd/reply.c:reply_close(3154)
  close fd=116 fnum=12636 (numopen=2)
[2002/11/06 12:17:47, 2] smbd/close.c:close_normal_file(211)
  ed closed file blah/~WRL0001.tmp (numopen=1) 
[2002/11/06 12:17:47, 3] smbd/process.c:process_smb(878)
  Transaction 14732 of length 97
[2002/11/06 12:17:47, 3] smbd/process.c:switch_message(685)
  switch message SMBtrans2 (pid 29782)
[2002/11/06 12:17:47, 3] smbd/trans2.c:call_trans2qfilepathinfo(1702)
  call_trans2qfilepathinfo: TRANSACT2_QPATHINFO: level = 1035
[2002/11/06 12:17:47, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/~WRL0001.tmp]
[2002/11/06 12:17:47, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah/~WRL0001.tmp]
[2002/11/06 12:17:47, 3] smbd/trans2.c:call_trans2qfilepathinfo(1733)
  call_trans2qfilepathinfo blah/~WRL0001.tmp level=1035 call=5 total_data=0
[2002/11/06 12:17:47, 3] smbd/process.c:process_smb(878)
  Transaction 14733 of length 61
[2002/11/06 12:17:47, 3] smbd/process.c:switch_message(685)
  switch message SMBunlink (pid 29782)
[2002/11/06 12:17:47, 3] smbd/reply.c:reply_unlink(2141)
  reply_unlink : \blah\~WRL0001.tmp
[2002/11/06 12:17:47, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/blah/~WRL0001.tmp]
[2002/11/06 12:17:47, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [blah/~WRL0001.tmp]
[2002/11/06 12:17:47, 2] smbd/open.c:open_file(242)
  Ed opened file blah/~WRL0001.tmp read=Yes write=No (numopen=2)
[2002/11/06 12:17:47, 2] smbd/close.c:close_normal_file(211)
  ed closed file blah/~WRL0001.tmp (numopen=1) 
[2002/11/06 12:17:50, 3] smbd/process.c:process_smb(878)
  Transaction 14734 of length 92
[2002/11/06 12:17:50, 3] smbd/process.c:switch_message(685)
  switch message SMBtrans2 (pid 29782)
[2002/11/06 12:17:50, 3] smbd/trans2.c:call_trans2findfirst(897)
  call_trans2findfirst: dirtype = 22, maxentries = 1366, close_after_first=1,
close_if_end = 1 requires_resume_key = 1 level = 260, max_data_bytes = 16384
[2002/11/06 12:17:50, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/office]
[2002/11/06 12:17:50, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [Office]
[2002/11/06 12:17:50, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [./]
[2002/11/06 12:17:50, 3] smbd/dir.c:dptr_create(487)
  creating new dirptr 256 for path ./, expect_close = 1
[2002/11/06 12:17:50, 3] smbd/process.c:process_smb(878)
  Transaction 14735 of length 86
[2002/11/06 12:17:50, 3] smbd/process.c:switch_message(685)
  switch message SMBtrans2 (pid 29782)
[2002/11/06 12:17:50, 3] smbd/trans2.c:call_trans2qfilepathinfo(1702)
  call_trans2qfilepathinfo: TRANSACT2_QPATHINFO: level = 1004
[2002/11/06 12:17:50, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/Office]
[2002/11/06 12:17:50, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [Office]
[2002/11/06 12:17:50, 3] smbd/trans2.c:call_trans2qfilepathinfo(1733)
  call_trans2qfilepathinfo Office level=1004 call=5 total_data=0
[2002/11/06 12:17:50, 3] smbd/process.c:process_smb(878)
  Transaction 14736 of length 105
[2002/11/06 12:17:50, 3] smbd/process.c:switch_message(685)
  switch message SMBtrans2 (pid 29782)
[2002/11/06 12:17:50, 3] smbd/trans2.c:call_trans2findfirst(897)
  call_trans2findfirst: dirtype = 22, maxentries = 1366, close_after_first=1,
close_if_end = 1 requires_resume_key = 1 level = 260, max_data_bytes = 16384
[2002/11/06 12:17:50, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/Office/My Documents]
[2002/11/06 12:17:50, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [Office/My Documents]
[2002/11/06 12:17:50, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [Office]
[2002/11/06 12:17:50, 3] smbd/dir.c:dptr_create(487)
  creating new dirptr 256 for path Office, expect_close = 1
[2002/11/06 12:17:50, 3] smbd/process.c:process_smb(878)
  Transaction 14737 of length 74
[2002/11/06 12:17:50, 3] smbd/process.c:switch_message(685)
  switch message SMBtrans2 (pid 29782)
[2002/11/06 12:17:50, 3] smbd/trans2.c:call_trans2qfsinfo(1356)
  call_trans2qfsinfo: level = 261
[2002/11/06 12:17:50, 3] smbd/process.c:process_smb(878)
  Transaction 14738 of length 99
[2002/11/06 12:17:50, 3] smbd/process.c:switch_message(685)
  switch message SMBtrans2 (pid 29782)
[2002/11/06 12:17:50, 3] smbd/trans2.c:call_trans2qfilepathinfo(1702)
  call_trans2qfilepathinfo: TRANSACT2_QPATHINFO: level = 1004
[2002/11/06 12:17:50, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/office/My Documents]
[2002/11/06 12:17:50, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [Office/My Documents]
[2002/11/06 12:17:50, 3] smbd/trans2.c:call_trans2qfilepathinfo(1733)
  call_trans2qfilepathinfo Office/My Documents level=1004 call=5 total_data=0
[2002/11/06 12:17:50, 3] smbd/process.c:process_smb(878)
  Transaction 14739 of length 99
[2002/11/06 12:17:50, 3] smbd/process.c:switch_message(685)
  switch message SMBtrans2 (pid 29782)
[2002/11/06 12:17:50, 3] smbd/trans2.c:call_trans2qfilepathinfo(1702)
  call_trans2qfilepathinfo: TRANSACT2_QPATHINFO: level = 1004
[2002/11/06 12:17:50, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [/office/My Documents]
[2002/11/06 12:17:50, 3] lib/util.c:unix_clean_name(387)
  unix_clean_name [Office/My Documents]
[2002/11/06 12:17:50, 3] smbd/trans2.c:call_trans2qfilepathinfo(1733)
  call_trans2qfilepathinfo Office/My Documents level=1004 call=5 total_data=0
[2002/11/06 12:18:18, 3] smbd/process.c:process_smb(878)
  Transaction 14740 of length 39
[2002/11/06 12:18:18, 3] smbd/process.c:switch_message(685)
  switch message SMBtdis (pid 29782)
[2002/11/06 12:18:18, 3] smbd/sec_ctx.c:set_sec_ctx(328)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2002/11/06 12:18:18, 3] smbd/sec_ctx.c:set_sec_ctx(328)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2002/11/06 12:18:18, 3] smbd/service.c:close_cnum(675)
  2940_350 (10.1.3.12) closed connection to service IPC$
[2002/11/06 12:18:18, 3] smbd/connection.c:yield_connection(48)
  Yielding connection to IPC$
[2002/11/06 12:18:18, 3] smbd/sec_ctx.c:set_sec_ctx(328)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2002/11/06 12:18:18, 3] smbd/vfs.c:vfs_ChDir(569)
  vfs_ChDir to /
[2002/11/06 12:18:18, 3] smbd/process.c:process_smb(878)
  Transaction 14741 of length 43
[2002/11/06 12:18:18, 3] smbd/process.c:switch_message(685)
  switch message SMBulogoffX (pid 29782)
[2002/11/06 12:18:18, 3] smbd/sec_ctx.c:set_sec_ctx(328)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2002/11/06 12:18:18, 3] smbd/reply.c:reply_ulogoffX(1781)
  ulogoffX vuid=118
[2002/11/06 12:18:18, 3] smbd/process.c:process_smb(878)
  Transaction 14742 of length 39
[2002/11/06 12:18:18, 3] smbd/process.c:switch_message(685)
  switch message SMBtdis (pid 29782)
[2002/11/06 12:18:18, 3] smbd/sec_ctx.c:set_sec_ctx(328)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2002/11/06 12:18:18, 3] smbd/sec_ctx.c:set_sec_ctx(328)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2002/11/06 12:18:18, 3] smbd/service.c:close_cnum(675)
  2940_350 (10.1.3.12) closed connection to service IPC$
[2002/11/06 12:18:18, 3] smbd/connection.c:yield_connection(48)
  Yielding connection to IPC$
[2002/11/06 12:18:18, 3] smbd/sec_ctx.c:set_sec_ctx(328)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2002/11/06 12:18:18, 3] smbd/process.c:process_smb(878)
  Transaction 14743 of length 39
[2002/11/06 12:18:18, 3] smbd/process.c:switch_message(685)
  switch message SMBtdis (pid 29782)
[2002/11/06 12:18:18, 3] smbd/sec_ctx.c:set_sec_ctx(328)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2002/11/06 12:18:18, 3] smbd/sec_ctx.c:set_sec_ctx(328)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2002/11/06 12:18:18, 1] smbd/service.c:close_cnum(675)
  2940_350 (10.1.3.12) closed connection to service ed
[2002/11/06 12:18:18, 3] smbd/connection.c:yield_connection(48)
  Yielding connection to ed
[2002/11/06 12:18:18, 3] smbd/sec_ctx.c:set_sec_ctx(328)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2002/11/06 12:19:06, 3] smbd/process.c:process_smb(878)
  Transaction 14744 of length 53
[2002/11/06 12:19:06, 3] smbd/process.c:switch_message(685)
  switch message SMBecho (pid 29782)
[2002/11/06 12:19:06, 3] smbd/sec_ctx.c:set_sec_ctx(328)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2002/11/06 12:19:06, 3] smbd/reply.c:reply_echo(3377)
  echo 1 times
[2002/11/06 12:19:06, 3] smbd/sec_ctx.c:set_sec_ctx(328)
  setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
-------------- next part --------------
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash) 
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
"testparm"
# to check that you have not made any basic syntactic errors. 
#
#======================= Global Settings
====================================[global]

# workgroup = NT-Domain-Name or Workgroup-Name
   workgroup = WHSD

# server string is the equivalent of the NT Description field
   server string = Zeus Samba Server

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
;   hosts allow = 192.168.1. 192.168.2. 127.

# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
   printcap name = /etc/printcap
;   load printers = yes

# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
;   printing = bsd

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
;  guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m
   log level = 3
# Put a capping on the size of the log files (in Kb).
   max log size = 50

# Security mode. Most people will want user level security. See
# security_level.txt for details.
   security = domain
# Use password server option only with security = server
   password server = NEMESIS

# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
;  password level = 8
;  username level = 8

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
  encrypt passwords = yes
;  smb passwd file = /etc/samba/smbpasswd

# The following are needed to allow password changing from Windows to
# update the Linux sytsem password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file'
above.
# NOTE2: You do NOT need these to allow workstations to change only
#        the encrypted SMB passwords. They allow the Unix password
#        to be kept in sync with the SMB password.
;  unix password sync = Yes
;  passwd program = /usr/bin/passwd %u
;  passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n
*passwd:*all*authentication*tokens*updated*successfully*

# Unix users can map to different SMB User names
;  username map = /etc/samba/smbusers

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /etc/samba/smb.conf.%m

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
   socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
;   interfaces = 192.168.12.2/24 192.168.13.2/24 

# Configure remote browse list synchronisation here
#  request announcement to, or browse list sync from:
#	a specific host or from / to a whole subnet (see below)
;   remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
;   remote announce = 192.168.1.255 192.168.2.44

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
;   local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
;   os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
;   domain master = yes 

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
;   preferred master = yes

# Use only if you have an NT server on your network that has been
# configured at install time to be a primary domain controller.
;   domain controller = <NT-Domain-Controller-SMBName>

# Enable this if you want Samba to be a domain logon server for 
# Windows95 workstations. 
;   domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
#        %L substitutes for this servers netbios name, %U is username
#        You must uncomment the [Profiles] share below
;   logon path = \\%L\Profiles\%U

# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be
specified
# the default order is "host lmhosts wins bcast". "host"
means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system
configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS
Server
;   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
   wins server = 10.1.1.5

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one	WINS Server on the network. The default is NO.
;   wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
   dns proxy = no 

# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
;  preserve case = no
;  short preserve case = no
# Default case is normally upper case for all DOS files
;  default case = lower
# Be very careful with case sensitivity - it can break things!
;  case sensitive = no

winbind separator = +
winbind uid = 1000-10000
winbind gid = 1000-10000
winbind enum users = yes
winbind enum groups = yes
template homedir = /data/home/%U
template shell = /bin/bash
mangling method = hash2
;nt smb support = no

#============================ Share Definitions
=============================[homes]
   comment = Home Directories
   browseable = no
   writeable = yes
#   inherit permissions = yes
#   inherit acls = yes
   create mask = 0700
   force create mode = 0700
   security mask = 0000
   force security mode = 0700
   directory mask = 0700
   force directory mode = 0700
   directory security mask = 0000
   nt acl support = yes
   hide dot files = yes

[data]
   comment = Data on Zeus
   path = /data
   writeable = yes
   valid users = +ntadmin
   admin users = +ntadmin
   browseable = no

[olddata]
   comment = Yesterday's Data
   path = /olddata
   writeable = no
   valid users = +ntadmin
   admin users = +ntadmin
   browseable = no

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
;   comment = Network Logon Service
;   path = /home/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
;    path = /home/profiles
;    browseable = no
;    guest ok = yes


# NOTE: If you have a BSD-style print system there is no need to 
# specifically define each individual printer
;[printers]
;   comment = All Printers
;   path = /var/spool/samba
;   browseable = no
# Set public = yes to allow user 'guest account' to print
;   guest ok = no
;   writable = no
;   printable = yes

# This one is useful for people to share files
;[tmp]
;   comment = Temporary file space
;   path = /tmp
;   read only = no
;   public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
;   comment = Public Stuff
;   path = /home/samba
;   public = yes
;   read only = yes
;   write list = @staff

# Other examples. 
#
# A private printer, usable only by fred. Spool data will be placed in
fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
;   comment = Fred's Printer
;   valid users = fred
;   path = /homes/fred
;   printer = freds_printer
;   public = no
;   writable = no
;   printable = yes

# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
;   comment = Fred's Service
;   path = /usr/somewhere/private
;   valid users = fred
;   public = no
;   writable = yes
;   printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %u option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
;  comment = PC Directories
;  path = /usr/pc/%m
;  public = no
;  writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
;   path = /usr/somewhere/else/public
;   public = yes
;   only guest = yes
;   writable = yes
;   printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
;   comment = Mary's and Fred's stuff
;   path = /usr/somewhere/shared
;   valid users = mary fred
;   public = no
;   writable = yes
;   printable = no
;   create mask = 0765

Seemingly Similar Threads

Search for more possibly parallel threads

samba - Nov 2002 - Problems with Word 200 and Samba 2.2.6

[Samba] Problems with Word 200 and Samba 2.2.6

[Samba] Problems with Word 200 and Samba 2.2.6

[Samba] Problems with Word 200 and Samba 2.2.6

Seemingly Similar Threads