Hi xin, Thanks for bringing up your Gluster issue. Abhishek (another Gluster community member) also faced the same issue. I asked below things for futher analysing this issue. could you provide me following information? Did you perform any manual operation with GlusterFS configuration file which resides in /var/lib/glusterd/* folder.? Can you provide output of "ls /var/lib/glusterd/peers" from both of your nodes. Can you provide output of #gluster volume info command Could you provide output of #gluster peer status command when 2nd node is down Down the glusterd on both node and bring glusterd one by one on both node and provide me output of #gluster peer status command Can you provide full logs details of cmd_history.log and etc-glusterfs-glusterd.vol.log from both the nodes. following things will be very useful for analysing this issue. You can restart your glusterd as of now as a workaround but we need to analysis this issue further. Thanks, ~Gaurav ----- Original Message ----- From: "songxin" <songxin_1980 at 126.com> To: gluster-users at gluster.org Sent: Friday, February 19, 2016 7:07:48 PM Subject: [Gluster-users] two same ip addr in peer list Hi, I create a replicate volume with 2 brick.And I frequently reboot my two nodes and frequently run ?peer detach? ?peer detach? ?add-brick? "remove-brick". A borad ip: 10.32.0.48 B borad ip: 10.32.1.144 After that, I run "gluster peer status" on A board and it show as below. Number of Peers: 2 Hostname: 10.32.1.144 Uuid: bbe2a458-ad3d-406d-b233-b6027c12174e State: Peer in Cluster (Connected) Hostname: 10.32.1.144 Uuid: bbe2a458-ad3d-406d-b233-b6027c12174e State: Peer in Cluster (Connected) I don't understand why the 10.32.0.48 has two peers which are both 10.32.1.144. Does glusterd not check duplicate ip addr? Any can help me to answer my quesion? Thanks? Xin _______________________________________________ Gluster-users mailing list Gluster-users at gluster.org http://www.gluster.org/mailman/listinfo/gluster-users
Marcos Renato da Silva Junior
2016-Feb-19 18:50 UTC
[Gluster-users] Establishing Connection (Connected)??
Hi, One of my nodes show "gluster peer status" : Number of Peers: 3 Hostname: 200.145.239.172 Uuid: 2f3aac03-6b27-4572-8edd-48fbf53b7883 State: Peer in Cluster (Connected) Hostname: 200.145.239.172 Uuid: 2f3aac03-6b27-4572-8edd-48fbf53b7883 State: Establishing Connection (Connected) Other names: node1 Hostname: servpos4 Uuid: b712284c-5b42-4c0e-b67c-a908aa47bd3c State: Peer in Cluster (Connected) Same address but one "State: Peer in Cluster" another "Establishing Connection (Connected)". Its works ok. -- Marcos Renato da Silva Junior Universidade Estadual Paulista - Unesp Faculdade de Engenharia de Ilha Solteira - FEIS Departamento de Engenharia El?trica 15385-000 - Ilha Solteira/SP (18) 3743-1164
Hi Gaurav, Thank you for your reply. I will do these test as you said. I face this issue on glusterd version is 3.7.6. Do you know if this issue has been fixed on latest version 3.7.8. Thanks, Xin ???? iPhone> ? 2016?2?20??02:17?Gaurav Garg <ggarg at redhat.com> ??? > > Hi xin, > > Thanks for bringing up your Gluster issue. > > Abhishek (another Gluster community member) also faced the same issue. I asked below things for futher analysing this issue. could you provide me following information? > > > Did you perform any manual operation with GlusterFS configuration file which resides in /var/lib/glusterd/* folder.? > > Can you provide output of "ls /var/lib/glusterd/peers" from both of your nodes. > > Can you provide output of #gluster volume info command > > Could you provide output of #gluster peer status command when 2nd node is down > > Down the glusterd on both node and bring glusterd one by one on both node and provide me output of #gluster peer status command > > Can you provide full logs details of cmd_history.log and etc-glusterfs-glusterd.vol.log from both the nodes. > > > following things will be very useful for analysing this issue. > > You can restart your glusterd as of now as a workaround but we need to analysis this issue further. > > > Thanks, > > ~Gaurav > > ----- Original Message ----- > From: "songxin" <songxin_1980 at 126.com> > To: gluster-users at gluster.org > Sent: Friday, February 19, 2016 7:07:48 PM > Subject: [Gluster-users] two same ip addr in peer list > > Hi, > I create a replicate volume with 2 brick.And I frequently reboot my two nodes and frequently run ?peer detach? ?peer detach? ?add-brick? "remove-brick". > A borad ip: 10.32.0.48 > B borad ip: 10.32.1.144 > > After that, I run "gluster peer status" on A board and it show as below. > > Number of Peers: 2 > > Hostname: 10.32.1.144 > Uuid: bbe2a458-ad3d-406d-b233-b6027c12174e > State: Peer in Cluster (Connected) > > Hostname: 10.32.1.144 > Uuid: bbe2a458-ad3d-406d-b233-b6027c12174e > State: Peer in Cluster (Connected) > > > > > I don't understand why the 10.32.0.48 has two peers which are both 10.32.1.144. > Does glusterd not check duplicate ip addr? > Any can help me to answer my quesion? > > Thanks? > Xin > > > > > > > > > > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://www.gluster.org/mailman/listinfo/gluster-users