Tyan has posted a lm_sensors config file for the Thunder K8SE S2892 at
ftp://ftp.tyan.com/software/lms/lms_s2892.conf
However when I ran the sensors command on my S2892 I was getting a readout for
an
adt7463 chip that wasn't referenced in the config file. I emailed Raphael
Deng at
Tyan asking him to confirm the manual edit needed to get sensors.conf to refer
to the
adt7463 chip. His reply was:
> It's ok. You know, lm85 and adt7463 are pretty similar.
> Sometimes, hardware designer or manufactory guys will use them mixed.
So, in Raphael's sensors.conf replace the line 'chip
"lm85-i2c-*-2e"' with 'chip
"adt7463-i2c-*-2e"' and all will be well.
Kirk Bocek
