lemmel
2007-Sep-13 09:08 UTC
[asterisk-users] fax machine detection for outgoing call on DIVA card
Hello,
I need to detect both fax and answer machine, and it should be valuable that
the detection will be run by the Diva card itself. So :
- I read Diva Documentation, and I found that the Diva could send some
specific DTMF, if I had "[..] enabled [this functionnality] by the
application for a designated controller through a manufacturer request
command 9 [...]", but I didn't figure how to activate it ; has someone
an
idea ?
- I read my capi.conf, and found the faxdetect parameter, which "enable
faxdetection and redirection to EXTEN fax for incoming and/or outgoing
calls", but I didn't succeed to perform that[1] ; has someone an idea
about
it ?
[1] I altered my capi.conf file, and put the fax entension just after the
Dial, and called a fax machine, but nothing happens. The capi log is in the
attachment.
P.S. : it is the second mail, for I forgot the attachment, and in the archive
web page
(http://lists.digium.com/pipermail/asterisk-users/2007-September/thread.html),
my mail seems to have the wrong id (as I had answer a message instead to make
a new one) for it belongs to a thread.
-------------- next part --------------
*CLI> -- Executing [120 at sipcontext:1]
NoOp("SIP/22-08503e28", "<paul> a compose le <120>
depuis le poste <22> de type < - 0>") in new stack
-- Executing [120 at sipcontext:2] Dial("SIP/22-08503e28",
"CAPI/contr2/120/b") in new stack
> data = contr2/120/b format=8
> parsed dialstring: 'contr2' 'NULL' '120'
'b'
> capi request controller = 2
== contr2#02: setting format alaw - 0x8 (alaw)
> parsed dialstring: 'contr2' 'NULL' '120'
'b'
> capi: peerlink -1 allocated, peer is unlinked
> CAPI devicestate requested for contr2#02/120
== contr2#02: Call CAPI/contr2#02/120-2 with B3 (pres=0x00, ton=0x00)
CONNECT_REQ ID=002 #0x060c LEN=0048
Controller/PLCI/NCCI = 0x2
CIPValue = 0x1
CalledPartyNumber = <80>120
CallingPartyNumber = <00 80>22
CalledPartySubaddress = default
CallingPartySubaddress = default
BProtocol
B1protocol = 0x1
B2protocol = 0x1
B3protocol = 0x0
B1configuration = default
B2configuration = default
B3configuration = default
GlobalConfiguration = default
BC = default
LLC = default
HLC = default
AdditionalInfo
BChannelinformation = <00 00>
Keypadfacility = default
Useruserdata = default
Facilitydataarray = default
SendingComplete = default
-- Called contr2/120/b
CONNECT_CONF ID=002 #0x060c LEN=0014
Controller/PLCI/NCCI = 0x302
Info = 0x0
-- contr2#02: received CONNECT_CONF PLCI = 0x302
INFO_IND ID=002 #0x0687 LEN=0017
Controller/PLCI/NCCI = 0x302
InfoNumber = 0x1e
InfoElement = <81 88>
INFO_RESP ID=002 #0x0687 LEN=0012
Controller/PLCI/NCCI = 0x302
-- contr2#02: info element PI 81 88
> contr2#02: In-band information available
CONNECT_B3_REQ ID=002 #0x060d LEN=0013
Controller/PLCI/NCCI = 0x302
NCPI = default
-- contr2#02: sent CONNECT_B3_REQ PLCI=0x302
-- CAPI queue frame:[ TYPE: Control (4) SUBCLASS: Unknown control
'14' (14) ] [contr2#02]
INFO_IND ID=002 #0x0688 LEN=0016
Controller/PLCI/NCCI = 0x302
InfoNumber = 0x18
InfoElement = <8a>
INFO_RESP ID=002 #0x0688 LEN=0012
Controller/PLCI/NCCI = 0x302
-- contr2#02: info element CHANNEL IDENTIFICATION 8a
INFO_IND ID=002 #0x0689 LEN=0015
Controller/PLCI/NCCI = 0x302
InfoNumber = 0x800d
InfoElement = default
INFO_RESP ID=002 #0x0689 LEN=0012
Controller/PLCI/NCCI = 0x302
-- contr2#02: info element SETUP ACK
CONNECT_B3_CONF ID=002 #0x060d LEN=0014
Controller/PLCI/NCCI = 0x120302
Info = 0x0
CONNECT_B3_ACTIVE_IND ID=002 #0x068b LEN=0013
Controller/PLCI/NCCI = 0x120302
NCPI = default
CONNECT_B3_ACTIVE_RESP ID=002 #0x068b LEN=0012
Controller/PLCI/NCCI = 0x120302
-- CAPI/contr2#02/120-2 is making progress passing it to SIP/22-08503e28
INFO_IND ID=002 #0x068c LEN=0015
Controller/PLCI/NCCI = 0x302
InfoNumber = 0x8002
InfoElement = default
INFO_RESP ID=002 #0x068c LEN=0012
Controller/PLCI/NCCI = 0x302
-- contr2#02: info element CALL PROCEEDING
-- CAPI queue frame:[ TYPE: Control (4) SUBCLASS: Unknown control
'15' (15) ] [contr2#02]
-- CAPI/contr2#02/120-2 is proceeding passing it to SIP/22-08503e28
INFO_IND ID=002 #0x069b LEN=0015
Controller/PLCI/NCCI = 0x302
InfoNumber = 0x8001
InfoElement = default
INFO_RESP ID=002 #0x069b LEN=0012
Controller/PLCI/NCCI = 0x302
-- contr2#02: info element ALERTING
-- CAPI queue frame:[ TYPE: Control (4) SUBCLASS: Ringing (3) ] [contr2#02]
-- CAPI/contr2#02/120-2 is ringing
> CAPI devicestate requested for contr2#02/120
INFO_IND ID=002 #0x06a3 LEN=0020
Controller/PLCI/NCCI = 0x302
InfoNumber = 0x29
InfoElement = <07 09 0c 0e 12>
INFO_RESP ID=002 #0x06a3 LEN=0012
Controller/PLCI/NCCI = 0x302
-- contr2#02: info element Date/Time 07/09/12 14:18
INFO_IND ID=002 #0x06a4 LEN=0015
Controller/PLCI/NCCI = 0x302
InfoNumber = 0x8007
InfoElement = default
INFO_RESP ID=002 #0x06a4 LEN=0012
Controller/PLCI/NCCI = 0x302
-- contr2#02: info element CONNECT
CONNECT_ACTIVE_IND ID=002 #0x06a6 LEN=0020
Controller/PLCI/NCCI = 0x302
ConnectedNumber = <00 83>120
ConnectedSubaddress = default
LLC = default
CONNECT_ACTIVE_RESP ID=002 #0x06a6 LEN=0012
Controller/PLCI/NCCI = 0x302
-- CAPI queue frame:[ TYPE: Control (4) SUBCLASS: Answer (4) ] [contr2#02]
-- CAPI/contr2#02/120-2 answered SIP/22-08503e28
> CAPI devicestate requested for contr2#02/120
== contr2#02: CAPI Hangingup for PLCI=0x302 in state 2
-- contr2#02: activehangingup (cause=16) for PLCI=0x302
DISCONNECT_B3_REQ ID=002 #0x0886 LEN=0013
Controller/PLCI/NCCI = 0x120302
NCPI = default
== Spawn extension (sipcontext, 120, 2) exited non-zero on
'SIP/22-08503e28'
> CAPI devicestate requested for contr2#02/120
> CAPI devicestate requested for contr2#02/120
DISCONNECT_B3_CONF ID=002 #0x0886 LEN=0014
Controller/PLCI/NCCI = 0x120302
Info = 0x0
DISCONNECT_B3_IND ID=002 #0x094a LEN=0015
Controller/PLCI/NCCI = 0x120302
Reason_B3 = 0x0
NCPI = default
DISCONNECT_B3_RESP ID=002 #0x094a LEN=0012
Controller/PLCI/NCCI = 0x120302
DISCONNECT_REQ ID=002 #0x0887 LEN=0013
Controller/PLCI/NCCI = 0x302
AdditionalInfo = default
DISCONNECT_CONF ID=002 #0x0887 LEN=0014
Controller/PLCI/NCCI = 0x302
Info = 0x0
INFO_IND ID=002 #0x094b LEN=0037
Controller/PLCI/NCCI = 0x302
InfoNumber = 0x1c
InfoElement = <91 a1 13 02 02 02 a9 02 01 22>0<0a
a1 05>0<03 02 01 00 82 01 01>
INFO_RESP ID=002 #0x094b LEN=0012
Controller/PLCI/NCCI = 0x302
-- contr2#02: info element FACILITY
INFO_IND ID=002 #0x094c LEN=0017
Controller/PLCI/NCCI = 0x302
InfoNumber = 0x8
InfoElement = <80 90>
INFO_RESP ID=002 #0x094c LEN=0012
Controller/PLCI/NCCI = 0x302
-- contr2#02: info element CAUSE 80 90
INFO_IND ID=002 #0x094d LEN=0015
Controller/PLCI/NCCI = 0x302
InfoNumber = 0x804d
InfoElement = default
INFO_RESP ID=002 #0x094d LEN=0012
Controller/PLCI/NCCI = 0x302
-- contr2#02: info element RELEASE
DISCONNECT_IND ID=002 #0x094f LEN=0014
Controller/PLCI/NCCI = 0x302
Reason = 0x3490
DISCONNECT_RESP ID=002 #0x094f LEN=0012
Controller/PLCI/NCCI = 0x302
> contr2#02: CAPI INFO 0x3490: Normal call clearing
== contr2#02: Interface cleanup PLCI=0x302
lemmel lemmel
2007-Sep-14 08:27 UTC
[asterisk-users] [SOLVED] fax machine detection for outgoing call on DIVAcard
I was helped by Armin Schindler from the chan_capi user list. So this is my answer and the solution to the chan_capi list : ------------------------------------------------------------------------------------------------------------->Make sure you have enabled the onboard DSP by using > softdtmf=off > relaxdtmf=off >in capi.conf.Many thanks, it worked perfectly :-). For information, when the fax is detected, asterisk performs a jump to the fax extension of the context associated to the controller and defined in the capi.conf. _________________________________________________________________ Ten : Messenger en illimit? sur votre mobile ! http://mobile.live.fr/messenger/ten/