asterisk users - Nov 2006 - PAP2 and Asterisk

I have a Linksys PAP2 connected to Asterisk.  Have one of the FXS ports
working fine.  I am unable to get the other to work.  Does anybody have an
example configuration to make both work.  Both are registering fine but
there's just no dialtone on the non working port.

TIA

Linksys PAP2 is known to accept a single G729 call, at a time.
Maybe this explains your issue ...
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20061201/ad77d350/attachment-0001.htm

Perhaps it is defective? does the status show l2 registered? Can you access
the IVR? (****#)

On 11/30/06, phil.dawson@marnock.com <phil.dawson@marnock.com>
wrote:
>
>
> I have a Linksys PAP2 connected to Asterisk.  Have one of the FXS ports
> working fine.  I am unable to get the other to work.  Does anybody have an
> example configuration to make both work.  Both are registering fine but
> there's just no dialtone on the non working port.
>
> TIA
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20061201/5054b633/attachment.htm