asterisk users - May 2006 - asterisk amportal start/stopped/start/stopped for all the time

Hi!I've this problem to another asterisk@home machine, without digium cards,
but only with a bri isdn card.It doesn't connect in the amportal
graphical,(it's stopped), if I make tha amportal start command this is the
result:

STARTING ASTERISK
Asterisk ended with exit status 1
Asterisk died with code 1.
Automatically restarting Asterisk.
Asterisk ended with exit status 1
Asterisk died with code 1.
Automatically restarting Asterisk.

-----------------------------------------------------
Asterisk could not start!
Use 'tail /var/log/asterisk/full' to find out why.
---------------------------------------------------

if use the tail comand this is the result:
-----------------------------------------------------
Asterisk could not start!
Use 'tail /var/log/asterisk/full' to find out why.
-----------------------------------------------------
[root@asterisk_179 ~]# tail /var/log/asterisk/full
May 23 04:06:36 VERBOSE[4327] logger.c:  [chan_features.so]May 23 04:06:36
VERBO                                              SE[4327] logger.c:
[chan_features.so] => (Feature Proxy Channel)
May 23 04:06:36 VERBOSE[4327] logger.c:   == Registered channel type
'Feature' (                                              Feature Proxy
Channel Driver)
May 23 04:06:36 VERBOSE[4327] logger.c:  [chan_zap.so]May 23 04:06:36
VERBOSE[43                                              27] logger.c:
[chan_zap.so] => (Zapata Telephony w/PRI)
May 23 04:06:36 VERBOSE[4327] logger.c:   == Parsing
'/etc/asterisk/zapata.conf'                                             
:
May 23 04:06:36 VERBOSE[4327] logger.c:   == Parsing
'/etc/asterisk/zapata.con                                             
f':
Found
May 23 04:06:36 WARNING[4327] config.c: Unknown directive 'switchtype'
at
line 9                                               of zapata.conf
May 23 04:06:36 WARNING[4327] config.c: Unknown directive
'overlapdial=yes'
at l                                              ine 22 of zapata.conf
May 23 04:06:36 ERROR[4327] chan_zap.c: Unknown signalling method
'bri_net_ptmp'
May 23 04:06:36 ERROR[4327] chan_zap.c: Signalling must be specified before
any                                               channels are.
May 23 04:06:36 WARNING[4327] loader.c: chan_zap.so: load_module failed,
returni                                              ng -1
May 23 04:06:36 WARNING[4327] loader.c: Loading module chan_zap.so failed!



Now in a second time I make again amportal start and start this:
Asterisk died with code 1.
Automatically restarting Asterisk.
Asterisk ended with exit status 1
Asterisk died with code 1.
Automatically restarting Asterisk.
Asterisk ended with exit status 1
Asterisk died with code 1.
Automatically restarting Asterisk.
Asterisk ended with exit status 1
Asterisk died with code 1.
Automatically restarting Asterisk.
Asterisk ended with exit status 1
Asterisk died with code 1.
Automatically restarting Asterisk.
Asterisk ended with exit status 1
Asterisk died with code 1.
Automatically restarting Asterisk.
Asterisk ended with exit status 1
Asterisk died with code 1.
Automatically restarting Asterisk.
Asterisk ended with exit status 1
Asterisk died with code 1.
Automatically restarting Asterisk.
.......

for all the time, and asterisk is connect for 3/4 seconds, then down, then
connect, then down...........
Where's the problem?(very strange this thing.....)
100000 thanks,Emanuele

Ciao!
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060524/48077d1e/attachment.htm

On Wed, 2006-05-24 at 12:26 +0200, Shenen Shenen wrote:
> Hi!I've this problem to another asterisk@home machine, without digium
> cards, but only with a bri isdn card.
This is not the appropriate place to ask Asterisk@Home questions. Try
the Asterisk@Home forum or their mailinglist. Hint: if you had actually
read the ouptut of /var/log/asterisk/full then you would have noticed
the two lines with ERROR in them. Perhaps you should investigate what is
causing those ERRORs.

Regards,
Patrick

On Wed, May 24, 2006 at 12:26:33PM +0200, Shenen Shenen
wrote:
> Hi!I've this problem to another asterisk@home machine, without digium
cards,
> but only with a bri isdn card.It doesn't connect in the amportal
> graphical,(it's stopped), if I make tha amportal start command this is
the
> result:
> 
> STARTING ASTERISK
> Asterisk ended with exit status 1
> Asterisk died with code 1.
> Automatically restarting Asterisk.
> Asterisk ended with exit status 1
> Asterisk died with code 1.
> Automatically restarting Asterisk.
> 
> -----------------------------------------------------
> Asterisk could not start!
> Use 'tail /var/log/asterisk/full' to find out why.
> ---------------------------------------------------
> 
> if use the tail comand this is the result:
> -----------------------------------------------------
> Asterisk could not start!
> Use 'tail /var/log/asterisk/full' to find out why.
> -----------------------------------------------------
> [root@asterisk_179 ~]# tail /var/log/asterisk/full
> May 23 04:06:36 VERBOSE[4327] logger.c:  [chan_features.so]May 23 04:06:36
> VERBO                                              SE[4327] logger.c:
> [chan_features.so] => (Feature Proxy Channel)
> May 23 04:06:36 VERBOSE[4327] logger.c:   == Registered channel type
> 'Feature' (                                              Feature
Proxy
> Channel Driver)
> May 23 04:06:36 VERBOSE[4327] logger.c:  [chan_zap.so]May 23 04:06:36
> VERBOSE[43                                              27] logger.c:
> [chan_zap.so] => (Zapata Telephony w/PRI)
> May 23 04:06:36 VERBOSE[4327] logger.c:   == Parsing
> '/etc/asterisk/zapata.conf'                                        
:
> May 23 04:06:36 VERBOSE[4327] logger.c:   == Parsing
> '/etc/asterisk/zapata.con                                             
f':
> Found
> May 23 04:06:36 WARNING[4327] config.c: Unknown directive
'switchtype' at
> line 9                                               of zapata.conf
> May 23 04:06:36 WARNING[4327] config.c: Unknown directive
'overlapdial=yes'
> at l                                              ine 22 of zapata.conf
> May 23 04:06:36 ERROR[4327] chan_zap.c: Unknown signalling method
> 'bri_net_ptmp'
> May 23 04:06:36 ERROR[4327] chan_zap.c: Signalling must be specified before
> any                                               channels are.
> May 23 04:06:36 WARNING[4327] loader.c: chan_zap.so: load_module failed,
> returni                                              ng -1
> May 23 04:06:36 WARNING[4327] loader.c: Loading module chan_zap.so failed!
> 
With a similar error, I asked you before for zatel.conf and zapata.conf
. I must repeat my request, I see. 

Do you use bristuff? If not: what ISDN channel do you use?

-- Tzafrir