Hi all,
We have several sipura 3000's working well for outbound calls, however
the issue we have is that when calls are sent to the Sipura with
Dial(SIP/${EXTEN:0}@sipura1) the Sipura does a SIP answer immediately
and then proceeds with the call "in band" therefore sending dialing
sounds back to the caller. Other SIP gateways we have notably the
Vegastream and others do not do a SIP answer until the call is
successfully connected to the called party.
Any ideas?
Have you updated with the lastest firmware..
It now does an on-hook forward to asterisk
Dave
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Eric Bishop
Sent: Tuesday, 31 May 2005 3:45 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] Sipura 3000 dialing "noise"
Hi all,
We have several sipura 3000's working well for outbound calls, however the
issue we have is that when calls are sent to the Sipura with
Dial(SIP/${EXTEN:0}@sipura1) the Sipura does a SIP answer immediately and
then proceeds with the call "in band" therefore sending dialing sounds
back
to the caller. Other SIP gateways we have notably the Vegastream and others
do not do a SIP answer until the call is successfully connected to the
called party.
Any ideas?
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.322 / Virus Database: 267.3.0 - Release Date: 30/05/2005
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.322 / Virus Database: 267.3.0 - Release Date: 30/05/2005
Eric
A completly off topic response (and not even a response in that I'm
asking you a question - sorry)
you say that you have "several" 3000 devices and you show your dial
string as :
Dial(SIP/${EXTEN:0}@sipura1)
Is the "sipura1" section referencing a single sipura or the group of
"several". The only reason that I ask if it is the latter - how are
you "grouping" them.
Thanks for you response.... if i figure the answer to your question I
will post back.
David
On 31/05/05, Eric Bishop <asterisk.eric@gmail.com>
wrote:> Hi all,
>
> We have several sipura 3000's working well for outbound calls, however
> the issue we have is that when calls are sent to the Sipura with
> Dial(SIP/${EXTEN:0}@sipura1) the Sipura does a SIP answer immediately
> and then proceeds with the call "in band" therefore sending
dialing
> sounds back to the caller. Other SIP gateways we have notably the
> Vegastream and others do not do a SIP answer until the call is
> successfully connected to the called party.
>
> Any ideas?
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>