asterisk users - Jul 2004 - Problems with * and Grandstream Budgetone 100

I have two problems with Asterisk and my Budgetone 100s.
 
1. Sometimes when outside callers dial my Budgetone it will ring twice, then
the caller will receive a busy signal.  This happens intermittently and I
cannot pin down the circumstances of when it works and when it doesn't.
Asterisk logging doesn't give me too much info when this happens:
 
*CLI> 
    -- Executing Dial("SIP/156.170.4.98-0813f380",
"SIP/2151|15") in new
stack
    -- Called 2151
    -- SIP/2151-2f5a is ringing
  == Spawn extension (from-sip, 8505232151, 1) exited non-zero on
'SIP/156.170.4.98-0813f380'
 
2. Outside callers do not receive ringback tone when they call my * phones.
I have tried supplying "r" as an option to the DIAL command but it
does not
help.
 
I have not been able to find solutions on google or the wiki.
 
Many thanks,
 
Mike Roberts
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040728/71f6b674/attachment.htm

Hmm what CVS version are you using? I had something similar happening back
around the beginning of July. It has since been fixed...

Also what firmware are you using? Earlier firmware had a problem where if MWI is
activated, the phone will unregister itself or go off hook.

Try upgrading to at least 1.0.5.3

  ----- Original Message ----- 
  From: Mike Roberts 
  To: asterisk-users@lists.digium.com 
  Sent: Wednesday, July 28, 2004 11:52 AM
  Subject: [Asterisk-Users] Problems with * and Grandstream Budgetone 100


  I have two problems with Asterisk and my Budgetone 100s.

  1. Sometimes when outside callers dial my Budgetone it will ring twice, then
the caller will receive a busy signal.  This happens intermittently and I cannot
pin down the circumstances of when it works and when it doesn't.   Asterisk
logging doesn't give me too much info when this happens:

  *CLI> 
      -- Executing Dial("SIP/156.170.4.98-0813f380",
"SIP/2151|15") in new stack
      -- Called 2151
      -- SIP/2151-2f5a is ringing
    == Spawn extension (from-sip, 8505232151, 1) exited non-zero on
'SIP/156.170.4.98-0813f380'

  2. Outside callers do not receive ringback tone when they call my * phones.  I
have tried supplying "r" as an option to the DIAL command but it does
not help.

  I have not been able to find solutions on google or the wiki.

  Many thanks,

  Mike Roberts
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040728/97d14819/attachment.htm

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Wednesday 28 July 2004 05:22 pm, Chris Shaw wrote:
> Hmm what CVS version are you using? I had something similar happening back
> around the beginning of July. It has since been fixed...
>
> Also what firmware are you using? Earlier firmware had a problem where if
> MWI is activated, the phone will unregister itself or go off hook.
>
> Try upgrading to at least 1.0.5.3
>
Yep, get the upgrade.

- -- 
Steve

"They that would give up essential liberty for temporary safety deserve
neither liberty nor safety."
                                Benjamin Franklin

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFBCHQsljK16xgETzkRArnyAJ0QM5wAPTtKeRkPiUtuaHmZsobjGQCfQ64A
9YAYG3BiZkZdyzI3OjPIArA=qf3S
-----END PGP SIGNATURE-----

An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040728/b002e7d8/attachment.htm
-------------- next part --------------
Hi,

 For the GS100 IP phone you have seperate IP, correct? then type that IP in the
browser. It will ask passwd (default : admin)now you can view that page for the
GS100 IP phone. In that page you can see one row

TFTP server:                    (for remote s/w upgrade and config)
            TFTP server is 4.3.153.50

Give this IP then go to the bottom of that page click "update" and
then click "reboot"

now you can see the updated software version in the top of that page.

regards
Murali






On Thu, 29 Jul 2004 Steve Szmidt wrote :
>-----BEGIN PGP SIGNED MESSAGE-----
>Hash: SHA1
>
>On Wednesday 28 July 2004 05:22 pm, Chris Shaw wrote:
> > Hmm what CVS version are you using? I had something similar happening
back
> > around the beginning of July. It has since been fixed...
> >
> > Also what firmware are you using? Earlier firmware had a problem where
if
> > MWI is activated, the phone will unregister itself or go off hook.
> >
> > Try upgrading to at least 1.0.5.3
> >
>
>Yep, get the upgrade.
>
>- --
>Steve
>
>"They that would give up essential liberty for temporary safety deserve
>neither liberty nor safety."
>                                 Benjamin Franklin
>
>-----BEGIN PGP SIGNATURE-----
>Version: GnuPG v1.2.4 (GNU/Linux)
>
>iD8DBQFBCHQsljK16xgETzkRArnyAJ0QM5wAPTtKeRkPiUtuaHmZsobjGQCfQ64A
>9YAYG3BiZkZdyzI3OjPIArA>=qf3S
>-----END PGP SIGNATURE-----
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users@lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

Muralikrishnan L
Software Engineer Trainee
Calsoft-Elnet Software City
Taramani